Approve the wall composition, not just a finish sample
A small marble-look sample can help you judge color and surface feel. It cannot establish how the pattern will cross a reception wall, meet a door or continue behind a television. For a distributor, designer or fit-out contractor, the purchasing decision should therefore include an approved elevation as well as an agreed product specification.
Start by asking what the proposed finish actually offers: a mirrored pair, a continuous sequence, repeated individual sheets or a layout assembled from separate patterns. These are different visual arrangements. The words marble look do not establish the panel’s substrate, manufacturing process or ability to form a continuous image.
This guide is a design-coordination checklist. Joint sizes, fixing methods, cutting limits and performance requirements must come from the written documentation for the selected system and the project’s responsible professionals.
Create one elevation that everyone can identify
Give each wall and piece a reference
Use a drawing revision, room name and wall identifier. Mark the viewing direction, floor level, ceiling line and intended visual center. Assign each proposed piece a unique position reference rather than relying on the finish name alone.
For example, a four-piece feature wall might use positions W01-A through W01-D. These are illustrative project labels, not AUTINBERG product models. Show the intended pattern orientation at every position and ask the manufacturer to confirm which available pattern reference belongs there.
Show the parts that will interrupt the pattern
Add doors, sockets, access panels, wall lights, screens and joinery. Record finished opening sizes and who verifies site dimensions. A centered vein may look balanced on an uninterrupted drawing but be removed by an opening. Review the actual exposed surface rather than the rectangular wall area alone.
Use a layout approval schedule
| Decision | Record on the approval | Question to resolve |
|---|---|---|
| Pattern sequence | Pattern reference for every wall position | Are the specified faces available as a coordinated set? |
| Orientation | Top edge, viewing side and direction | Can a piece be rotated without changing the agreed composition? |
| Junctions | Corner, end, ceiling and door details | Where does the pattern stop, return or meet a trim? |
| Cuts and openings | Finished dimensions and cut-out positions | Who confirms the cutting plan and permitted edge details? |
| Appearance | Accepted sample and mock-up references | What visual variation is acceptable under the intended lighting? |
| Release | Drawing revision, approver and date | Does the quotation refer to this exact revision? |
A manufacturer’s own guide illustrates why these records matter: Cosentino’s Aura Bookmatch manual separates piece references, setting out, identification and packing. That document concerns its specific Dekton system. It is a useful example of coordination discipline, not an installation specification for AUTINBERG panels.
Review joints, trims and lighting together
Do not promise an invisible joint
Ask for the proposed joint detail and confirm it with the installer. A printed vein crossing a joint does not remove the joint itself. A metal divider, shadow gap or corner trim can intentionally frame a composition; it also changes where the pattern is visible. Keep the agreed detail on the elevation.
For a wall containing a concealed door, review the door perimeter, handle or opening method and access clearances with the door-system provider. A finish match alone does not establish a compatible door assembly.
Assess a sample in the intended setting
Compare the selected finish with adjacent wood tones, metal trims and flooring. View it under the planned lighting and from the main approach to the room. Photographs can help record a decision, but exposure, screen settings and light color can change perceived tone. Use the agreed physical sample as the reference for appearance discussions.
If appearance is critical, agree the scope of a mock-up before committing the full quantity: what it includes, who reviews it and what constitutes acceptance. Do not treat a concept rendering as the accepted production sample.
Connect the approved elevation to the order and packing
The final order should refer to the approved drawing revision, selected product, finish references, quantities by position and agreed trim details. Ask whether sequence references can remain identifiable on the packing list and packaging. Confirm the answer before assuming that pieces will arrive in installation order.
Keep cutting allowance and maintenance spares separate from the net wall area. The appropriate quantities depend on the actual layout, available formats, handling plan and replacement strategy; a universal percentage is not a reliable substitute for a cutting schedule.
Before release, have the designer approve appearance, the installer confirm the proposed assembly and the purchaser reconcile quantities and commercial terms. If any party changes an opening, pattern or panel format, issue a revised drawing rather than relying on a message beside an older approval.
Frequently asked questions
Does every marble-look wall panel support bookmatching?
No. Confirm whether the selected finish is supplied as mirrored faces, a continuous sequence or repeated sheets. A marble-look finish name alone does not establish pattern continuity.
Can a catalog photograph replace a layout approval?
No. A catalog image illustrates an appearance. The approval should identify the actual wall dimensions, openings, pattern references, orientation and joint details for the order.
What should I send for a layout discussion?
Send a numbered wall elevation, finished dimensions, opening locations, the desired finish reference and destination. Identify which dimensions are confirmed and which remain subject to site measurement.
Discuss your feature-wall layout
Send AUTINBERG your elevation, finish reference and project destination. Ask us to confirm the available pattern arrangement and product documentation before you approve quantities.
Sources and scope
Prepared by AUTINBERG for procurement planning. The manufacturer references below apply to their own systems and are not evidence of AUTINBERG product performance. Confirm technical requirements for the exact product before ordering. References reviewed 20 October 2026.